Liqui Moly Pro-Line Diesel Particulate Filter Purge 500 ml

Out of stock

LIQUI MOLY Pro-Line Diesel Particulate Filter Purge is a highly effective cleaning and neutralization fluid required after cleaning the car diesel particulate filter with LIQUI MOLY Pro-Line Diesel Particulate Filter Cleaner. The Pro-Line Diesel Particulate Filter Purge rinses off the soot dissolved in the Pro-Line Diesel Particulate Filter Cleaner and distributes it in the diesel particulate filter so that it can be burnt off during normal regeneration. The Pro-Line Diesel Particulate Filter Cleaner is neutralized by rinsing with the Diesel Particulate Filter Purge.

The LIQUI MOLY Diesel Particulate Filter Purge is used with the diesel particulate filter installed and with the aid of the LIQUI MOLY DPF Pressure Cup Spray Gun (part no. 7946) and the specially developed LIQUI MOLY DPF Gun with 5 spray probes (part no. 7945). 

The problem of clogged diesel particulate filters mainly affects short-haul vehicles, which is why the cleaning interval with the LIQUI MOLY Diesel Particulate Filter Cleaner and the LIQUI MOLY Diesel Particulate Filter Purge is strongly dependent on vehicle use. Regular cleaning, however, can reduce operating costs and eliminate the need for a costly replacement of the diesel particulate filter. In addition, the use of LIQUI MOLY Pro-Line Diesel Particulate Filter Purge ensures optimum handling, engine performance and low fuel consumption.

  • highly effective cleaning and neutralization fluid for diesel particulate filters
  • dissolves soot in the diesel particulate filter
  • ensures lower fuel consumption
More Information
Manufacturer Liqui Moly
Item No. LM-5171-F
Properties

The LIQUI MOLY Pro-Line Diesel Particulate Filter Purge

  • ensures optimum engine performance
  • dissolves soot
  • reduces operating costs
  • guarantees lower fuel consumption
Application

Cleaning is performed with the DPF Pressure Cup Spray Gun (part no. 7946) and the specially developed DPF Gun with 5 spray probes (part no. 7945). Depending on the type of vehicle, access to the diesel particulate filter is to be established. On most vehicles, the temperature or pressure sensor of the diesel particulate filter has to be removed for this.

Note: The temperature of the particulate filter during cleaning should be less than 40 °C.

In some vehicles, the diesel particulate filter is located near the exhaust manifold or in some cases the turbocharger rather than on the underbody. For safety reasons, extreme care must be taken when cleaning these vehicles to ensure that no cleaning or flushing fluid gets into the combustion chamber through an exhaust valve that has been left open.

The appropriate Pro-Line Spray Probe for the type of vehicle is introduced into the particulate filter through the opening that is created. The total amount of ProLine Diesel Particulate Filter Cleaner cleaning fluid (1 l) is sprayed directly onto the surface of the particulate filter in several intervals of 5 - 10 seconds with a break of 5 - 10 seconds in each case at an operating pressure of 6 - 8 bar. In order to coat the entire surface with Pro-Line Diesel Particulate Filter Cleaner to the best possible extent, the probe must be turned and moved back and forth when cleaning. Wait approx. 15 minutes to allow the cleaner to take effect. The particulate filter is then rinsed with the total amount of flushing fluid (500 ml) with Pro-Line Diesel Particulate Filter Purge.

Processing is likewise performed with the DPF Pressure Cup Spray Gun (part no. 7946) at the same intervals as for the cleaning fluid. The cleaning process dissolves the soot and distributes it in the particulate filter so that it can be burned off during normal regeneration. After the sensor has been reinstalled, the service operation or the workshop must initiate a regeneration according to the manufacturer’s specifications.

ATTENTION: Refer to the safety data sheet for the protective measures to be taken when handling the product.

CAUTION: Depressurize and empty completely after applying pressure vessel. Gun should not be stored with material in the container.

Volume 0.5 L
EAN-Code 4100420051715
Write Your Own Review
You're reviewing:Liqui Moly Pro-Line Diesel Particulate Filter Purge 500 ml
Your Rating

Product Questions

No questions yet. Be the first to ask the question!