Ravenol Engine Oil, ATF, Coolant, etc.
-
RAVENOL STOU SAE 10W-40As low as €34.49- STOU special oil with SAE 10W-40
- complies with API CG-4, GL-4
- ISO VG 32-100 specification
-
- STOU special oil with SAE 10W-40
- meets API CG-4, GL-4
- ISO VG 32-100 specification
-
- STOU special oil with SAE 10W-40
- meets API CG-4, GL-4
- ISO VG 32-100 specification
-
RAVENOL Low Emission Truck SAE 10W-40As low as €39.95- mineral truck engine oil
- for EURO 3, 4 and 5 engines
- meets Volvo VDS-4 and MB 228.31
-
RAVENOL EURO VI Truck 10W-40As low as €10.49- semi-synthetic Low SAPS engine oil
- meets ACEA E9
- for Deutz, MB, Cummins, MAN, Volvo, Renault, Scania
-
RAVENOL Performance Truck SAE 10W-40As low as €44.95- semi-synthetic diesel engine oil
- meets ACEA E7
- for longest oil change intervals
-
RAVENOL EURO IV Truck SAE 10W-40As low as €44.95- for high performance suction and turbo diesel engines
- MB 228.51 approval
- for Euro I up to V engines
Buy industrial oil online at ATO24
The industrial fluid management requires a continuous monitoring of the liquid working media. In point of that it requires a constantly view of the acting energies. So that the oil works efficient. The daily stresses of pumps, compressors and valves require a high chemical composition of industrial oils. For this reason it is advisable to always rely on a high quality oil. In the field of industry, we offer the products of hydraulic oil, vacuum pump oil, gear oil, compressor oil, hydraulic oil and drilling oil concentrate. In addition to industrial oil, ATO24 also offers coolant for the industrial sector. Especially recommended is the Ravenol HTC coolant. The HTC stands for Hybrid Technology Coolant Concentrat and points to the particular chemical composition. For the purpose of fluid management, it is also free of amines and phosphates.
Buy 10W-40 Oil: Huge selection, top prices
In the ATO24 online store you get exactly the right 10W-40 engine oil for your vehicle! In addition to top prices, we offer you reliable advice and help you find the right 10W-40 oil.
The viscosity SAE 10W-40 belongs next to 5W-30 to the most demanded engine oil viscosity. But what exactly does 10W-40 actually mean and why are there so many different oils despite the same viscosity? We will clarify these and other questions in the course of this blog article.
What does 10W-40 mean?
10W40 stands for a multigrade viscosity. Correctly written out as 10W-40, the two viscosity indexes given, 10W and 40, refer to all-season use (suitability for winter and summer use). These multigrade oils were developed over 50 years ago and were intended to replace the procedure of having to change oil at summer and winter time. The viscosity specification in cold (10W) and warm (40) viscosity indicates the oil's flowability at high and low temperatures.
10W stands for the flowability in winter (this is where the W index comes from). The value 10 is not a directly measurable value of a certain unit but an index number. The lower the number before the W, the better the flowability at cold temperatures and cold starts. A 5W-30 engine oil therefore has better flow properties in cold conditions than a 10W-40 engine oil.
The number 40 stands for the flowability of the oil at a temperature of 100 degrees Celsius. Again, the lower the number, the lower the viscosity at a temperature of 100 degrees. Accordingly, a 10w40 engine oil is more viscous than a 0W-30 engine oil.
Buy 10W-40: Here's what to keep in mind!
Even if the vehicle manual recommends a 10w-40 engine oil, the right 10W40 oil is not immediately found. When buying a 10W-40, attention must be paid to the prescribed specification and release. They represent the particular chemical properties of an oil.
10W-40 engine oil approvals
As always, your vehicle may require a release in addition to the 10W-40 viscosity. These approvals are listed on the bottle label next to the specifications. The best known approvals are those of BMW (e.g. LL-04), VW (e.g. VW 507 00) and Mercedes Benz (e.g. MB 251.0). The approvals with the engine oil are comparable with a quality seal of the automobile manufacturers. Thus this manufacturer issues a certain chemical characteristic of oils, which must be fulfilled, in order to be permissible for the cars from the own product series.
What engine oil approvals occur together with viscosity SAE 10W-40? Among many others, are common engine oils of the following releases and recommendations 10W-40 engine oils:
- BMW Special Oil 10W-40 Engine Oil
- Mercedes-Benz MB 229.1 10W-40 Engine Oil
- VW 505 00 10W-40 Engine Oil
What is the difference between 10W-30 and 10W-40?
Both viscosities share the winter property "10W", which means that they have the same properties at low temperatures and cold start. The indices 30 and 40 refer to a difference at high temperatures. Thus, the 10W-40 shows a slightly higher viscosity at high operating temperatures. This difference can be advantageous if the engine has oil losses with a 10W-30 motor oil.
Ravenol is a trademark of Ravensberger Schmierstoffvertrieb GmbH, located in Werther. High quality lubricants are produced in Germany and sold in the domestic as well as worldwide. After the founding in 1946 Ravenol developed and produced only single-grade engine oils and various cleaning agents. In 1964, after the company's expansion, multigrade oils of SAE classes 10W-30 and 20W-50 have been added to the product range. In the 90s, began the global orientation of the brand Ravenol and the products "Made in Germany" have been distributed internationally. The high product quality is thereby certified by 3 certifications. This is, the ISO / TS 16949 certificate, which includes DIN EN ISO 9001. The ultra-modern Laboratium of Ravenol is certified by DIN EN ISO / IEC 17025. With this high quality standard there are multiple approvals by various OEMs such as Daimler, Chrysler, VW, BMW, Porsche, MAN, Volvo, MTU, Deutz, ZF, Steyr Motors, Cummins, and many other. Furthermore the products of Ravenol are listed in NMMA (National Marine Manufacturers Association) and API (American Petroleum Institute).
A special feature of Ravenol is the CleanSynto formulation. For this purpose, synthetic base oils are blended with premium additives of CleanSynto technology so soot and dirt deposits are reduced. The oils of Ravenol extend the oil change intervals and engine life while reducing operating costs. In addition, the company from East Westphalia has been able to land another technological coup in recent years. With the unique USVO technology the quality of some engine oils could be raised to an even higher level. USVO stands for Ultra Strong Viscosity Oil. Primarily the new technology achieves an extreme stability of the viscosity, which protects the engine even more. This is particularly interesting for high power peaks and longer operation.
