Ravenol Engine Oil, ATF, Coolant, etc.
-
RAVENOL STOU SAE 10W-30As low as €35.95- Special oil for agricultural machinery, excavators, construction machinery
- for engine, gearbox, hydraulics, compressors
- fulfills API GL-4, ISO VG 68
-
- special oil for agriculture, excavators, construction equipment
- for engine, gearbox, hydraulics, compressors
- meets API GL-4, ISO VG 68
-
RAVENOL EDT Extreme Duty Truck SAE 10W-30As low as €86.95- for the latest generation of turbo diesel commercial vehicle engines
- for diesel fuel with sulfur content up to 15ppm
- meets API FA-4 release
-
- SHPD-Motorenöl für Euro 5 und Euro 6
- erfüllt Volvo VDS-4 und Renault RLD 3
- für Mack, MB, MAN, CAT, Volvo, Renault
-
- SHPD engine oil for Euro 5 and Euro 6
- meets Volvo VDS-4 and Renault RLD 3
- for Mack, MB, MAN, CAT, Volvo, Renault
Buy industrial oil online at ATO24
The industrial fluid management requires a continuous monitoring of the liquid working media. In point of that it requires a constantly view of the acting energies. So that the oil works efficient. The daily stresses of pumps, compressors and valves require a high chemical composition of industrial oils. For this reason it is advisable to always rely on a high quality oil. In the field of industry, we offer the products of hydraulic oil, vacuum pump oil, gear oil, compressor oil, hydraulic oil and drilling oil concentrate. In addition to industrial oil, ATO24 also offers coolant for the industrial sector. Especially recommended is the Ravenol HTC coolant. The HTC stands for Hybrid Technology Coolant Concentrat and points to the particular chemical composition. For the purpose of fluid management, it is also free of amines and phosphates.
Engine oil 10W-30: Large selection, wide range, top prices at ATO24
You are looking for a suitable 10W-30 engine oil for your vehicle? In the online store of ATO24 you are right!
We help you to find out what is important for your vehicle and to buy exactly the right one from our large selection of SAE 10W-30 engine oils. In addition to our competent advice, we offer you attractive prices.
In addition to the engine oil viscosity SAE 10W-40, oils of the viscosity class SAE 10W-30 are among the most demanded engine oils with the cold viscosity 10W. But what exactly does 10W-30 actually mean and why are there so many different oils despite the same viscosity? We will clarify these and other questions in the course of this blog article.
What does 10W-30 mean?
SAE 10W30 is what is known as a multigrade viscosity. Correctly written out as 10W-30, the two viscosity indexes given, 10W and 30, refer to all-season use (suitability for winter and summer use). These multigrade oils were developed over 50 years ago and were intended to replace the procedure of having to change oil at summer and winter time. The viscosity specification in cold (10W) and warm (30) viscosity indicates the flowability of the oil at high and low temperatures.
10W stands for the flowability in winter (this is where the W index comes from). The value 10 is not a directly measurable value of a certain unit but an index number. The lower the number before the W, the better the flowability at cold temperatures and cold starts. A 5W-30 engine oil therefore has better flow properties when cold than a 10W-30 engine oil.
The number 30 stands for the flowability of the oil at a temperature of 100 degrees. Again, the lower the number, the lower the viscosity at a temperature of 100 degrees. Accordingly, a 10w30 engine oil here is comparable to a 5W-30 engine oil.
Buy 10W-30: There is to consider!
Even if the vehicle manual recommends a 10w-30 engine oil, this does not immediately mean that you have found the right 10W30 oil. When buying a 10W-40, attention must be paid to the prescribed specification and approval. They represent the particular chemical properties of an oil.
10W-30 engine oil approvals
As always, your vehicle may require a approval in addition to the 10W-30 viscosity. These approvals are listed on the bottle label next to the specifications. The best known approvals are those of BMW (e.g. LL-04), VW (e.g. VW 507 00) and Mercedes Benz (e.g. MB 251.0). The approvals with the engine oil are comparable with a quality seal of the automobile manufacturers. Thus this manufacturer issues a certain chemical characteristic of oils, which must be fulfilled, in order to be permissible for the cars from the own product series.
What engine oil approvals occur together with viscosity SAE 10W-30? Among many others, common engine oils are of the following clearances and recommendations 10W-30 engine oils:
What is the difference between 10W-30 and 10W-40?
Both viscosities share the "10W" winter property, which means they have the same properties at low temperatures and cold starting. The indices 30 and 40 refer to a difference at high temperatures. Thus, the 10W-40 shows a slightly higher viscosity at high operating temperatures. This difference can be advantageous if the engine has oil losses with a 10W-30 motor oil.
Ravenol is a trademark of Ravensberger Schmierstoffvertrieb GmbH, located in Werther. High quality lubricants are produced in Germany and sold in the domestic as well as worldwide. After the founding in 1946 Ravenol developed and produced only single-grade engine oils and various cleaning agents. In 1964, after the company's expansion, multigrade oils of SAE classes 10W-30 and 20W-50 have been added to the product range. In the 90s, began the global orientation of the brand Ravenol and the products "Made in Germany" have been distributed internationally. The high product quality is thereby certified by 3 certifications. This is, the ISO / TS 16949 certificate, which includes DIN EN ISO 9001. The ultra-modern Laboratium of Ravenol is certified by DIN EN ISO / IEC 17025. With this high quality standard there are multiple approvals by various OEMs such as Daimler, Chrysler, VW, BMW, Porsche, MAN, Volvo, MTU, Deutz, ZF, Steyr Motors, Cummins, and many other. Furthermore the products of Ravenol are listed in NMMA (National Marine Manufacturers Association) and API (American Petroleum Institute).
A special feature of Ravenol is the CleanSynto formulation. For this purpose, synthetic base oils are blended with premium additives of CleanSynto technology so soot and dirt deposits are reduced. The oils of Ravenol extend the oil change intervals and engine life while reducing operating costs. In addition, the company from East Westphalia has been able to land another technological coup in recent years. With the unique USVO technology the quality of some engine oils could be raised to an even higher level. USVO stands for Ultra Strong Viscosity Oil. Primarily the new technology achieves an extreme stability of the viscosity, which protects the engine even more. This is particularly interesting for high power peaks and longer operation.
