Manual Transmission Fluid

8 Items

per page
Set Ascending Direction
  1. nissan mt gear oil tl/jr 75w-80
    Nissan MT Gear Oil TL/JR 75W-80 1 L
    (€11.95* / 1 L)
    • 75W-80
    • manual transmission and rear axle oil
    • for sports and off-road vehicles
  2. Nissan Schaltgetriebe
    Nissan MT-XZ Gear Oil 75W-85 1 L
    (€10.95* / 1 L)
    • SAE 75-W85
    • for Nissan sports and off-road vehicles
    • for manual and bridge transmissions
    • für synchronized and non-synchronized transmission
    • meets MB 235.0
    • API GL-5 specification
  3. RAVENOL MTF-1 75W-85--0-
    RAVENOL MTF-1 SAE 75W-85
    As low as €13.95
    • API GL-4/GL-5 specification
    • fully synthetic formulation
    • MB 235.4 and 235.7 recommendation
    • High performance gear oil with API GL-4 / GL-5 specification
    • suitable for any type of seal
    • reduces gearbox drag and fuel consumption
    • fully synthetic multi-grade hypoid transmission oil
    • API GL5 + LS (Limited Slip)
    • for Mercedes, Toyota, BMW, Fiat, Mopar
    • API GL-4 / MIL-L-2105D specification
    • Ford SQM-2C-9008A recommendation
    • for MAN, ZF
    • multi purpose hypoid transmission oil
    • meets MB 235.7 and 235.74 approval

8 Items

per page
Set Ascending Direction

Buy manual transmission fluid online at ATO24

Gear oils are abbreviated with GL which stands for Gear Lubricant. Furthermore gear oil is called transmission fluid. It describes the various transmission oil classes with numbers from one to six representing the resistance of the oil. These classes were introduced shortly API by the American Petroleum Institute. The class API GL - 1 includes gear oils for light applications that are not mixed with additives. They are used in bevel gears, worm gears and non-synchronized manual. Oils class API GL - 2 are suitable for use in moderate applications, they usually contain additives that protect against wear. API GL - 3 oils have also been developed for moderate applications, are not recommended for hypoid gears.


Gear oil for matching application

Gear oils with API GL-4 classification, can be used under several conditions. They are suitable for bevel and hypoid gears with small axial offset and are also recommended for non-synchromesh gearboxes. For synchronized manual transmission oils class four is the minimum standard in Europe. API GL-5 gear oils are classified suitable for use under harsh conditions. They are used for lubricating bevel and hypoid gears with large axial offset. In addition they are suitable for use in differentials. Frequently manufacturers use in this type of gear oils various approvals that appropriate oil may be used in this case only in the approved by the manufacturer Gear. This is often found particularly in limited-slip differentials (LS). The specification API GL-6 had been withdrawn, since it was found that API GL-5 gear oils meet the requirements sufficiently.